SPECS
Viewing angle: 190 degrees
Barrel diameter: 0.5 in  |  12 mm
Fits door thickness: 1.4 – 2.2 in  |
35 – 55 mm
A712
Refurbished/repackaged by manufacturer.*
Overview
Our door viewers are high design takes on classic fixtures, without sacrificing economy.
Solid Brass construction available in three striking finishes.
Available with UL rated glass or acrylic lenses. Choose the finish and lens content that suits your style and budget.
Suitable for wood, fiberglass, or metal doors (consult the user manual for your drill and drill bits).
Can’t find what you are looking for? We have a broad selection to chose from. Send us a message and let us help!
Installation
1. Make sure it is of standard thickness, usually from 33mm – 50mm (1 3/8 inches – 2 inches).
2. Decide where you want the door viewer to go. It should be in the center of your door and about five feet from the ground. Once you’ve found your spot, mark an “X” there with a pencil.
3. Use a 12mm or  1/2” drill bit to drill a hole on the the “X” pencil mark.
4. Insert the viewing scope and the barrel through each end of the hole. With a quarter (or any suitable tool) fitted to the barrel notch, tighten the barrel and viewing scope until they fit snugly on the door.